Vi har fundet 60 dele i kategorien. Vælg din bil, så vi kan vise dig dele, som passer til den.
- Frekvensområde [MHz]: 433 | Tryk til (bar): 9 | Tillægsartikel/Yderligere info. 2: med tryksensor | Tillægsartikel/Yderligere info. 2: med integreret lufttemperatursensor | Tillægsartikel/Yderligere info.: med batteri
- Frekvensområde [MHz]: 433
- Tryk til (bar): 9
- Tillægsartikel/Yderligere info. 2: med tryksensor
- Tillægsartikel/Yderligere info. 2: med integreret lufttemperatursensor
- Tillægsartikel/Yderligere info.: med batteri
- Tillægsartikel/Yderligere info. 2: med skrue
- Antal skruer: 1
- Varenummer på det anbefalede specialværktøj: 95990001
- vægt [g]: 36
- kun i forbindelse med: 95990001
- Farve: grå
- Tillægsartikel/Yderligere info. 2: med ventiler
- Materiale: Gummi/metal
- Dieser Snap-In-Radsensor wird in Leichtmetall- und Stahlfelgen verbaut und ist kabellos aktivierbar. Zu beachten ist die auf 210 km/h beschränkte zulässige Höchstgeschwindigkeit. Die Lieferung erfolgt mit Gummiventil.
- Die Herth+Buss Radsensoren können in allen Fahrzeugen mit serienmäßig verbautem Reifendruck-Kontrollsystem eingesetzt werden. Für deren Programmierung und Ausrichtung auf das jeweilige Fahrzeug wird der AirGuard benötigt. Dieser Vorgang dauert nur 5 bis 15 Sekunden pro Sensor. Ein Plus der Herth+Buss Radsensoren: Die Original-Serien-/ID-Nummer kann vom alten Sensor auf den neuen kopiert oder neu vergeben werden. Außerdem sind die Radsensoren wiederbeschreibbar und in Alu- sowie Stahlfelgen verwendbar. Die Sensoren sind einzeln bestellbar und werden mit komplettem Ventil geliefert. Ein Ersatzventil ist zusätzlich erhältlich. • Einer für alle: optimale Bevorratung mit nur einem universal Radsensor • für Stahl- oder Aluminiumfelgen • Zertifizierung bis 210 km/h • Batterielaufzeit: 3-7 Jahre
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med ventiler
- Tillægsartikel/Yderligere info. 2: med skrue
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Vægt [kg]: 0,025
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med ventiler
- Tillægsartikel/Yderligere info. 2: med skrue
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Vægt [kg]: 0,025
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- kun i forbindelse med: 95990001 | Frekvensområde [MHz]: 433 | Tryk til (bar): 9 | Tilspændingsmoment til [Nm]: 4 | Tillægsartikel/Yderligere info. 2: med tryksensor
- kun i forbindelse med: 95990001
- Frekvensområde [MHz]: 433
- Tryk til (bar): 9
- Tilspændingsmoment til [Nm]: 4
- Tillægsartikel/Yderligere info. 2: med tryksensor
- Tillægsartikel/Yderligere info. 2: med integreret lufttemperatursensor
- Tillægsartikel/Yderligere info.: med batteri
- Tillægsartikel/Yderligere info. 2: med tætningsring
- Tillægsartikel/Yderligere info. 2: med udvendig omløber
- Tillægsartikel/Yderligere info. 2: med skrue
- Antal skruer: 1
- vægt [g]: 46
- Varenummer på det anbefalede specialværktøj: 95990001
- Informationsoverførsel: radio
- Materiale: Aluminium
- Tillægsartikel/Yderligere info. 2: med ventiler
- Die Herth+Buss Radsensoren können in allen Fahrzeugen mit serienmäßig verbautem Reifendruck-Kontrollsystem eingesetzt werden. Für deren Programmierung und Ausrichtung auf das jeweilige Fahrzeug wird der AirGuard benötigt. Dieser Vorgang dauert nur 5 bis 15 Sekunden pro Sensor. Ein Plus der Herth+Buss Radsensoren: Die Original-Serien-/ID-Nummer kann vom alten Sensor auf den neuen kopiert oder neu vergeben werden. Außerdem sind die Radsensoren wiederbeschreibbar, in Alu- sowie Stahlfelgen verwendbar und kabellos aktivierbar. Die Sensoren sind einzeln bestellbar und werden mit komplettem Ventil in Standard-Silber geliefert. Ein Ventil-Reparatursatz ist zusätzlich erhältlich, außerdem Ersatzventile in Silber und Schwarz. • Einer für alle: optimale Bevorratung mit nur einem universal Radsensor • winkelverstellbare Ventile • für Stahl- oder Aluminiumfelgen • Zertifizierung bis 250 km/h • Batterielaufzeit: 3-7 Jahre • nur in Verbindung mit AirGuard 95990001 programmierbar
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med skrue
- Tillægsartikel/Yderligere info. 2: med ventiler
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Vægt [kg]: 0,028
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med skrue
- Tillægsartikel/Yderligere info. 2: med ventiler
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Vægt [kg]: 0,028
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Version: TG1C | Det anbefalede tilbehørs varenummer: S180084510A | Det anbefalede tilbehørs varenummer: A2C59517072 | Højeste tilladte hastighed: 250 | Fælge: til stålfælge
Vigtige henvisninger om dæktrykkontrolsystem
- Version: TG1C
- Det anbefalede tilbehørs varenummer: S180084510A
- Det anbefalede tilbehørs varenummer: A2C59517072
- Højeste tilladte hastighed: 250
- Fælge: til stålfælge
- Fælge: til letmetalfælge
- Ventilskaftmateriale: Aluminium
- Farve: sølv
- Frekvensområde [MHz]: 434
- Tightening torque for the union nut: 8 Nm
- Tightening torque for the valve insert: 0.4 Nm
- Check compatibility of rim with sensor.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med ventiler
- Tillægsartikel/Yderligere info. 2: med skrue
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Vægt [kg]: 0,025
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med ventiler
- Tillægsartikel/Yderligere info. 2: med skrue
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Version: TG1C | Det anbefalede tilbehørs varenummer: S180084500A | Det anbefalede tilbehørs varenummer: A2C59517072 | Højeste tilladte hastighed: 250 | Fælge: til stålfælge
- Version: TG1C
- Det anbefalede tilbehørs varenummer: S180084500A
- Det anbefalede tilbehørs varenummer: A2C59517072
- Højeste tilladte hastighed: 250
- Fælge: til stålfælge
- Fælge: til letmetalfælge
- Ventilskaftmateriale: Aluminium
- Farve: sølv
- Frekvensområde [MHz]: 434
- Tightening torque for the union nut: 8 Nm
- Tightening torque for the valve insert: 0.4 Nm
- Check compatibility of rim with sensor.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem | Frekvensområde [MHz]: 433 | Anbefalet udskiftningsinterval [Km]: 160.000 | Anbefalet udskiftningsinterval [År]: 5
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Frekvensområde [MHz]: 433
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Vægt [kg]: 0,048
- Indpakningsbredde [cm]: 4,9
- Indpakningsbredde [cm]: 6,8
- Indpakningshøjde [cm]: 3
- Indpakningshøjde [cm]: 9,2
- Indpakningsdybde [cm]: 9
- Indpakningsdybde [cm]: 7,4
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
- Farve: sølv | Tilspændingsmoment [Nm]: 4 | Monteringstype: boltet / skruet | Ventiltype: Luftventil | Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Farve: sølv
- Tilspændingsmoment [Nm]: 4
- Monteringstype: boltet / skruet
- Ventiltype: Luftventil
- Køretøjstilbehør: til køretøjer med dæktrykkontrolsystem
- Tillægsartikel/Yderligere info. 2: med skrue
- Tillægsartikel/Yderligere info. 2: med ventiler
- Frekvensområde [MHz]: 433
- Komplet sæt:
- Anbefalet udskiftningsinterval [Km]: 160.000
- Anbefalet udskiftningsinterval [År]: 5
- Ventilskaftmateriale: Aluminium
- Indpakningsbredde [cm]: 4
- Indpakningshøjde [cm]: 6,7
- Indpakningsdybde [cm]: 6,8
- Reifenbefüllung gemäß Herstellervorgaben ist erforderlich
- Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Vis originale reservedelsnumre
Vis køretøjstyper
Kontroller kompatibilitet med køretøj! Kontroller, om varen er kompatibel med dit køretøj.
| ###COL_1_TITLE### | ###COL_2_TITLE### |
|---|
| ###COL_1_VALUE### | ###COL_2_VALUE### |
| ###COL_1_TITLE### | ###COL_2_TITLE### | ###COL_3_TITLE### |
|---|
| ###COL_1_VALUE### | ###COL_2_VALUE### | ###COL_3_VALUE### |
